[midPoint] Log Rotation for AD Connector

Jason Everling jeverling at bshp.edu
Tue Aug 25 19:24:49 CEST 2015


Thanks! I will give that a try and see how it works out. I will probably
also create a task that deletes anything older than a certain amount of
time, depending how long I would want to keep them.

JASON

On Tue, Aug 25, 2015 at 11:40 AM, Ivan Noris <ivan.noris at evolveum.com>
wrote:

> Hi Jason,
>
> we've tested some of the default .NET possibilities, but I'm sure it can
> be made better.
>
> I'm experimenting with this:
>
>  ...
>     <sharedListeners>
>     <!-- Testing, 16.1.2015 -->
>         <add name="myListener"
> type="Microsoft.VisualBasic.Logging.FileLogTraceListener,
> Microsoft.VisualBasic, Version=10.0.0.0, Culture=neutral,
> PublicKeyToken=b03f5f7f11d50a3a"
>         initializeData="FileLogWriter"
>         location="Custom"
>         logFileCreationSchedule="Daily"
>         customLocation="logs/" baseFileName="*connectorserver-test*"
>         MaxFileSize="9223372036854775807"
>         traceOutputOptions="DateTime">
>          <filter type="System.Diagnostics.EventTypeFilter"
>           initializeData="Verbose"/>
>           </add>
>     </sharedListeners>
> ...
>
> All files are stored in logs/ subdirectory (CS must have write permission
> there) and named connectorserver-test-2015-MM-DD.log
>
> A new file will be created each day on first log entry (i.e. if you don't
> provision to AD for a couple of days, you will not have empty log files for
> each day created). Also I don't like the log format...
>
> The section is based on some googled articles, unfortunately I can't find
> that bookmark right now. I just remember that there are other ways of
> rotating which require some other components (some .NET libraries?) to be
> installed.
>
> Hope this helps.
>
> Regards,
> IVan
>
>
> On 08/25/2015 06:11 PM, Jason Everling wrote:
>
> What is the best way to get the system to rotate the logs on the Connector
> Server?
>
> I noticed in midpoint the task had shutdown from a communication error and
> could not figure out why until I saw the size of the log on the server
> running the connector server, it was over 1Gb causing the system to hang up.
>
> I stopped the service and then deleted the log file then restarted the
> service and resumed the task in midpoint and all is good now.
>
> In the future, how should this be handled? I have the system.diagnostics
> configured to the bare minimum so that logging will be reduced.
>
> --
> JASON
>
>
>
> CONFIDENTIALITY NOTICE:
> This e-mail together with any attachments is proprietary and confidential;
> intended for only the recipient(s) named above and may contain information
> that is privileged. You should not retain, copy or use this e-mail or any
> attachments for any purpose, or disclose all or any part of the contents to
> any person. Any views or opinions expressed in this e-mail are those of the
> author and do not represent those of the Baptist School of Health
> Professions. If you have received this e-mail in error, or are not the
> named recipient(s), you are hereby notified that any review, dissemination,
> distribution or copying of this communication is prohibited by the sender
> and to do so might constitute a violation of the Electronic Communications
> Privacy Act, 18 U.S.C. section 2510-2521. Please immediately notify the
> sender and delete this e-mail and any attachments from your computer.
>
>
> _______________________________________________
> midPoint mailing listmidPoint at lists.evolveum.comhttp://lists.evolveum.com/mailman/listinfo/midpoint
>
>
> --
>   Ing. Ivan Noris
>   Senior Identity Management Engineer & IDM Architect
>   evolveum.com                     evolveum.com/blog/
>   ___________________________________________________
>   "Semper Id(e)M Vix."
>
>
> _______________________________________________
> midPoint mailing list
> midPoint at lists.evolveum.com
> http://lists.evolveum.com/mailman/listinfo/midpoint
>
>


-- 
JASON

-- 


CONFIDENTIALITY NOTICE:
This e-mail together with any attachments is proprietary and confidential; 
intended for only the recipient(s) named above and may contain information 
that is privileged. You should not retain, copy or use this e-mail or any 
attachments for any purpose, or disclose all or any part of the contents to 
any person. Any views or opinions expressed in this e-mail are those of the 
author and do not represent those of the Baptist School of Health 
Professions. If you have received this e-mail in error, or are not the 
named recipient(s), you are hereby notified that any review, dissemination, 
distribution or copying of this communication is prohibited by the sender 
and to do so might constitute a violation of the Electronic Communications 
Privacy Act, 18 U.S.C. section 2510-2521. Please immediately notify the 
sender and delete this e-mail and any attachments from your computer. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20150825/1dd44d41/attachment.htm>


More information about the midPoint mailing list