[midPoint] Log Rotation for AD Connector
Ivan Noris
ivan.noris at evolveum.com
Tue Aug 25 19:40:50 CEST 2015
The mentioned example seems to be from here:
https://szabomatyi.wordpress.com/2010/10/12/logging-in-net-apps-out-of-the-box-trace-listener-with-log-rotation/
Regards,
Ivan
On 08/25/2015 07:24 PM, Jason Everling wrote:
> Thanks! I will give that a try and see how it works out. I will
> probably also create a task that deletes anything older than a certain
> amount of time, depending how long I would want to keep them.
>
> JASON
>
> On Tue, Aug 25, 2015 at 11:40 AM, Ivan Noris <ivan.noris at evolveum.com
> <mailto:ivan.noris at evolveum.com>> wrote:
>
> Hi Jason,
>
> we've tested some of the default .NET possibilities, but I'm sure
> it can be made better.
>
> I'm experimenting with this:
>
> ...
> <sharedListeners>
> <!-- Testing, 16.1.2015 -->
> <add name="myListener"
> type="Microsoft.VisualBasic.Logging.FileLogTraceListener,
> Microsoft.VisualBasic, Version=10.0.0.0, Culture=neutral,
> PublicKeyToken=b03f5f7f11d50a3a"
> initializeData="FileLogWriter"
> location="Custom"
> logFileCreationSchedule="Daily"
> customLocation="logs/" baseFileName="*connectorserver-test*"
> MaxFileSize="9223372036854775807"
> traceOutputOptions="DateTime">
> <filter type="System.Diagnostics.EventTypeFilter"
> initializeData="Verbose"/>
> </add>
> </sharedListeners>
> ...
>
> All files are stored in logs/ subdirectory (CS must have write
> permission there) and named connectorserver-test-2015-MM-DD.log
>
> A new file will be created each day on first log entry (i.e. if
> you don't provision to AD for a couple of days, you will not have
> empty log files for each day created). Also I don't like the log
> format...
>
> The section is based on some googled articles, unfortunately I
> can't find that bookmark right now. I just remember that there are
> other ways of rotating which require some other components (some
> .NET libraries?) to be installed.
>
> Hope this helps.
>
> Regards,
> IVan
>
>
> On 08/25/2015 06:11 PM, Jason Everling wrote:
>> What is the best way to get the system to rotate the logs on the
>> Connector Server?
>>
>> I noticed in midpoint the task had shutdown from a communication
>> error and could not figure out why until I saw the size of the
>> log on the server running the connector server, it was over 1Gb
>> causing the system to hang up.
>>
>> I stopped the service and then deleted the log file then
>> restarted the service and resumed the task in midpoint and all is
>> good now.
>>
>> In the future, how should this be handled? I have the
>> system.diagnostics configured to the bare minimum so that logging
>> will be reduced.
>>
>> --
>> JASON
>>
>>
>>
>> CONFIDENTIALITY NOTICE:
>> This e-mail together with any attachments is proprietary and
>> confidential; intended for only the recipient(s) named above and
>> may contain information that is privileged. You should not
>> retain, copy or use this e-mail or any attachments for any
>> purpose, or disclose all or any part of the contents to any
>> person. Any views or opinions expressed in this e-mail are those
>> of the author and do not represent those of the Baptist School of
>> Health Professions. If you have received this e-mail in error, or
>> are not the named recipient(s), you are hereby notified that any
>> review, dissemination, distribution or copying of this
>> communication is prohibited by the sender and to do so might
>> constitute a violation of the Electronic Communications Privacy
>> Act, 18 U.S.C. section 2510-2521. Please immediately notify the
>> sender and delete this e-mail and any attachments from your
>> computer.
>>
>>
>> _______________________________________________
>> midPoint mailing list
>> midPoint at lists.evolveum.com <mailto:midPoint at lists.evolveum.com>
>> http://lists.evolveum.com/mailman/listinfo/midpoint
>
> --
> Ing. Ivan Noris
> Senior Identity Management Engineer & IDM Architect
> evolveum.com <http://evolveum.com> evolveum.com/blog/ <http://evolveum.com/blog/>
> ___________________________________________________
> "Semper Id(e)M Vix."
>
>
> _______________________________________________
> midPoint mailing list
> midPoint at lists.evolveum.com <mailto:midPoint at lists.evolveum.com>
> http://lists.evolveum.com/mailman/listinfo/midpoint
>
>
>
>
> --
> JASON
>
>
>
> CONFIDENTIALITY NOTICE:
> This e-mail together with any attachments is proprietary and
> confidential; intended for only the recipient(s) named above and may
> contain information that is privileged. You should not retain, copy or
> use this e-mail or any attachments for any purpose, or disclose all or
> any part of the contents to any person. Any views or opinions
> expressed in this e-mail are those of the author and do not represent
> those of the Baptist School of Health Professions. If you have
> received this e-mail in error, or are not the named recipient(s), you
> are hereby notified that any review, dissemination, distribution or
> copying of this communication is prohibited by the sender and to do so
> might constitute a violation of the Electronic Communications Privacy
> Act, 18 U.S.C. section 2510-2521. Please immediately notify the sender
> and delete this e-mail and any attachments from your computer.
>
>
> _______________________________________________
> midPoint mailing list
> midPoint at lists.evolveum.com
> http://lists.evolveum.com/mailman/listinfo/midpoint
--
Ing. Ivan Noris
Senior Identity Management Engineer & IDM Architect
evolveum.com evolveum.com/blog/
___________________________________________________
"Semper Id(e)M Vix."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20150825/5b32b9af/attachment.htm>
More information about the midPoint
mailing list