[midPoint] Admin GUI Configuration - Issue

Martin Lízner - AMI Praha a.s. martin.lizner at ami.cz
Fri Jan 18 17:04:35 CET 2019


I reported very similar issue, which has been fixed in 3.9-support. May
help. M.

https://jira.evolveum.com/browse/MID-5002

*Martin Lízner*
chief solution architect

gsm: [+420] 737 745 571
e‑mail: martin.lizner at ami.cz

*AMI Praha a.s.*
Pláničkova 11, 162 00 Praha 6

tel.: [+420] 274 783 239 | web: www.ami.cz

[image: AMI Praha a.s.]

Textem tohoto e‑mailu podepisující neslibuje uzavřít ani neuzavírá
za společnost AMI Praha a.s.
jakoukoliv smlouvu. Každá smlouva, pokud bude uzavřena, musí mít výhradně
písemnou formu.

Tento e‑mail je určen výhradně pro potřeby jeho adresáta/ů a může obsahovat
důvěrné nebo osobní
informace. Nejste‑li zamýšleným příjemcem, je zakázáno jakékoliv
zveřejňování, zprostředkování
nebo jiné použití těchto informací. Pokud jste obdrželi e‑mail neoprávněně,
informujte o tom prosím
odesílatele a vymažte neprodleně všechny kopie tohoto e‑mailu včetně
všech jeho příloh. Nakládáním
s neoprávněně získanými informacemi se vystavujete riziku právního postihu.


pá 18. 1. 2019 v 15:55 odesílatel Oleksandr Nekriach <o.nekriach at dynatech.lv>
napsal:

> Hi Jesica,
> Remove id="6" from your configuration settings. Midpoint doesn't allow to
> use the same id
>
>     <adminGuiConfiguration>
>         <objectForms>
>             <objectForm>
>                 <type>c:RoleType</type>
>                 <formSpecification>
>                     <panelUri>
> http://midpoint.evolveum.com/xml/ns/public/gui/component-3#focusTabBasic
> </panelUri>
>                 </formSpecification>
>             </objectForm>
>         </objectForms>
>     </adminGuiConfiguration>
>
> On Wed, 16 Jan 2019 at 20:44, Jésica Collado <collado.jesica at gmail.com>
> wrote:
>
>> Hi,
>>
>> I'm trying to configure the available tabs in User and Role Forms. So, I
>> have 2 roles which make available diferent tabs. But I got an application
>> error when a user who has both roles login in a specific situation.
>>
>> If I put, for instance, this xml section in one role
>>     <adminGuiConfiguration>
>>         <objectForms>
>>             <objectForm id="6">
>>                 <type>c:UserType</type>
>>                 <formSpecification>
>>                     <panelUri>
>> http://midpoint.evolveum.com/xml/ns/public/gui/component-3#focusTabBasic
>> </panelUri>
>>                 </formSpecification>
>>             </objectForm>
>>         </objectForms>
>>     </adminGuiConfiguration>
>>
>> And put this one in the other role
>>     <adminGuiConfiguration>
>>         <objectForms>
>>             <objectForm id="6">
>>                 <type>c:RoleType</type>
>>                 <formSpecification>
>>                     <panelUri>
>> http://midpoint.evolveum.com/xml/ns/public/gui/component-3#focusTabBasic
>> </panelUri>
>>                 </formSpecification>
>>             </objectForm>
>>         </objectForms>
>>     </adminGuiConfiguration>
>>
>> I'll get this error message: Attempt to add a container value with an id
>> that already exists: 6
>>
>> The actual reason seems to be the objectForm id. If I change one of the
>> id I'll stop getting the error.
>>
>> Is this the correct way to report an incident?
>>
>> Thank you.
>> Jésica Collado
>> _______________________________________________
>> midPoint mailing list
>> midPoint at lists.evolveum.com
>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>
>
>
> --
> Best regards,
>
>
>
> Oleksandr Nekriach | Identity and access management engineer
>
> Dynatech, Jeruzalemes iela 1, Rīga, LV-1010, Latvia
> <https://www.google.com/maps/place/DYNATECH/@56.9575205,24.1107235,17z/data=!3m1!4b1!4m5!3m4!1s0x46eecf5753e42351:0x23b120b9745cae62!8m2!3d56.9575205!4d24.1129122>
>
> +37125314685 <+371%2025%20314%20685>
> ,
> o.nekriach at dynatech.lv
> |
> www.dynatech.lv
>
>
> Stay connected:
> <https://www.facebook.com/DynatechLatvia/?ref=br_rs>
> <https://www.linkedin.com/company-beta/17893047/>
>
>
> Confidentiality Notice: This message contains confidential information and
> is intended only for the named recipient(s). If you are not the addressee
> you may not copy, distribute or perform any other activities with this
> information. If you have received this transmission in error, please notify
> us by e-mail immediately. E-mail transmission cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted, lost,
> destroyed, arrive late or incomplete, or contain viruses.
> _______________________________________________
> midPoint mailing list
> midPoint at lists.evolveum.com
> http://lists.evolveum.com/mailman/listinfo/midpoint
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20190118/884db541/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: o.nekriach at dynatech.lv1520941785292-7772
Type: image/png
Size: 786 bytes
Desc: not available
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20190118/884db541/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: o.nekriach at dynatech.lv1520941785292-7771
Type: image/png
Size: 790 bytes
Desc: not available
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20190118/884db541/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: o.nekriach at dynatech.lv1520941785292-7770
Type: image/png
Size: 4265 bytes
Desc: not available
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20190118/884db541/attachment-0002.png>


More information about the midPoint mailing list