[midPoint] Fwd: Fwd: SMS Notification
mrveceylan at gmail.com
mrveceylan at gmail.com
Sat Mar 11 11:40:27 CET 2017
Hi, can you help me?
İleti başlangıcı:
> Kimden: mceylan <mrveceylan at gmail.com>
> Tarih: 8 Mart 2017 15:48:08 GMT+3
> Kime: midPoint General Discussion <midpoint at lists.evolveum.com>
> Konu: Ynt: [midPoint] Fwd: SMS Notification
>
> Hi Jason,
>
> All I can not do is send sms for some roles.
> The expression filter does not work for scripts with only the end user role. So I need to pull the roletype of the assignment type and synchronize the end user.
>
> Thanks,
>
> 2017-03-07 16:47 GMT+02:00 Jason Everling <jeverling at bshp.edu>:
>> I attached a truncated sample, it will send a notification only if it is a activation change and the person is directly affiliated with us (e.g student, faculty, staff).
>>
>>
>>
>> JASON
>>
>>> On Tue, Mar 7, 2017 at 12:28 AM, mceylan <mrveceylan at gmail.com> wrote:
>>> Hi Jason,
>>>
>>> If you want to send notifications only for those with active status enable, how about configuring?
>>>
>>> You are notified when a user is created or modified by Active status. How should this be expression filter, subject expression, body expression?
>>>
>>> Thanks,
>>>
>>> 2017-03-06 17:24 GMT+02:00 Jason Everling <jeverling at bshp.edu>:
>>>> That is beyond my scope, I have never used it for roles, only activation and attribute values
>>>>
>>>> You could use event.isRelatedToItem, I briefly tested it, although, it will also fire for any assignment so I am sure it can be further set to roles only but I wouldn't know
>>>>
>>>> <handler>
>>>> <expressionFilter>
>>>> <script>
>>>> <code>
>>>> event.isRelatedToItem(new com.evolveum.midpoint.prism.path.ItemPath("assignment"))
>>>> </code>
>>>> </script>
>>>> </expressionFilter>
>>>> <simpleUserNotifier>
>>>>
>>>> Maybe someone has done it before and will respond, but for now, that above seems to work. The docs are below.
>>>>
>>>> https://www.evolveum.com/downloads/midpoint/3.4.1/midpoint-3.4.1-javadoc/com/evolveum/midpoint/prism/path/ItemPath.html
>>>>
>>>> JASON
>>>>
>>>>> On Mon, Mar 6, 2017 at 2:55 AM, mceylan <mrveceylan at gmail.com> wrote:
>>>>> hi Jason,
>>>>>
>>>>> Could you help me write code to filter by role changes?
>>>>> I did not succeed in the event part :(
>>>>>
>>>>> Thank you
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 2017-03-03 10:35 GMT+02:00 mceylan <mrveceylan at gmail.com>:
>>>>>> hi,
>>>>>>
>>>>>> notification configuration add
>>>>>>
>>>>>>
>>>>>> <bodyExpression> <!-- Body expression is defined here -->
>>>>>> <script>
>>>>>> <code> <!-- Some imports needed to have all necessary objects and variables -->
>>>>>> import com.evolveum.midpoint.notifications.impl.notifiers.GeneralNotifier;
>>>>>> import com.evolveum.midpoint.notifications.api.events.ModelEvent;
>>>>>> import com.evolveum.midpoint.prism.delta.ObjectDelta;
>>>>>> delta = ObjectDelta.summarize(((ModelEvent) event).getFocusDeltas());
>>>>>> hiddenPaths = GeneralNotifier.getAuxiliaryPaths()
>>>>>> body = ''
>>>>>> attemptedTo = event.isSuccess() ? "" : "(attempted to be) ";
>>>>>> if (delta.isAdd()) {
>>>>>> body = "The object was " + attemptedTo + "created with the following data:\n";
>>>>>> body += textFormatter.formatObject(delta.getObjectToAdd(), hiddenPaths, false);
>>>>>> }
>>>>>> </code>
>>>>>> </script>
>>>>>> </bodyExpression>
>>>>>>
>>>>>>
>>>>>>
>>>>>> error log file:
>>>>>>
>>>>>>
>>>>>> com.evolveum.midpoint.util.exception.ExpressionEvaluationException: groovy.lang.MissingMethodException: No signature of method: static com.evolveum.midpoint.notifications.impl.notifiers.GeneralNotifier.getAuxiliaryPaths() is applicable for argument types: () values: [] (new) body expression
>>>>>>
>>>>>> 2017-03-02 17:48 GMT+02:00 Jason Everling <jeverling at bshp.edu>:
>>>>>>> Within the first section, <expressionFilter> , is where you have to create a filter to watch for role changes, I am sorry though, that code is beyond me or what I have ever done.
>>>>>>>
>>>>>>> <handler>
>>>>>>> <expressionFilter>
>>>>>>> <script>
>>>>>>> <code>
>>>>>>> code to filter by role changes...
>>>>>>> </code>
>>>>>>> </script>
>>>>>>> </expressionFilter>
>>>>>>>
>>>>>>> and within the body expression is where you need to code what you want to have in the message, for example
>>>>>>>
>>>>>>> <bodyExpression>
>>>>>>> <script>
>>>>>>> <code>
>>>>>>> body = "Account modified:" + requestee?.getName()?.getOrig()
>>>>>>> </code>
>>>>>>> </script>
>>>>>>> </bodyExpression>
>>>>>>>
>>>>>>> JASON
>>>>>>>
>>>>>>>> On Thu, Mar 2, 2017 at 6:44 AM, mceylan <mrveceylan at gmail.com> wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I can send sms when I make an account change, but the same message goes by default. No detailed message is going.
>>>>>>>>
>>>>>>>>
>>>>>>>> Message{to='054355444543544]', subject='[IDM] SUCCESS: User MODIFY operation succeeded for test', contentType='null', body='Notification about user-related operation (status: SUCCESS)
>>>>>>>>
>>>>>>>>
>>>>>>>> For example, I want you to be given a new role when you change roles.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>>
>>>>>>>> 2017-03-01 19:05 GMT+02:00 Pavol Mederly <mederly at evolveum.com>:
>>>>>>>>> Hello Jason,
>>>>>>>>>
>>>>>>>>> I think you are right. It should work. (Haven't tried it myself as well, though).
>>>>>>>>> Pavol Mederly
>>>>>>>>> Software developer
>>>>>>>>> evolveum.com
>>>>>>>>>> On 01.03.2017 17:14, Jason Everling wrote:
>>>>>>>>>> You would have to use the simpleUserNotifier for that and add sms as the transport but I have never used it before, maybe someone else would know if it works with sms? You could then use an expression filter so that it only gets sent to specific users based on some common attribute, more info here on how or what can be added,
>>>>>>>>>>
>>>>>>>>>> https://wiki.evolveum.com/display/midPoint/Configuring+notifications
>>>>>>>>>>
>>>>>>>>>> <handler>
>>>>>>>>>> <expressionFilter>
>>>>>>>>>> <script>
>>>>>>>>>> <code>
>>>>>>>>>> code to filter by role changes...
>>>>>>>>>> </code>
>>>>>>>>>> </script>
>>>>>>>>>> </expressionFilter>
>>>>>>>>>> <simpleUserNotifier>
>>>>>>>>>> <name>Account Modified</name>
>>>>>>>>>> <status>success</status>
>>>>>>>>>> <recipientExpression>
>>>>>>>>>> <script>
>>>>>>>>>> <code>requestee.getTelephoneNumber()</code>
>>>>>>>>>> </script>
>>>>>>>>>> </recipientExpression>
>>>>>>>>>> <subjectExpression>
>>>>>>>>>> <script>
>>>>>>>>>> <code>
>>>>>>>>>> subject code
>>>>>>>>>> </code>
>>>>>>>>>> </script>
>>>>>>>>>> </subjectExpression>
>>>>>>>>>> <bodyExpression>
>>>>>>>>>> <script>
>>>>>>>>>> <code>
>>>>>>>>>> body code
>>>>>>>>>> </code>
>>>>>>>>>> </script>
>>>>>>>>>> </bodyExpression>
>>>>>>>>>> <transport>sms</transport>
>>>>>>>>>> </simpleUserNotifier>
>>>>>>>>>> </handler>
>>>>>>>>>>
>>>>>>>>>> JASON
>>>>>>>>>>
>>>>>>>>>>> On Tue, Feb 28, 2017 at 9:49 AM, mceylan <mrveceylan at gmail.com> wrote:
>>>>>>>>>>> Thanks Jason, I did it before the answer came :)
>>>>>>>>>>>
>>>>>>>>>>> So, how do I send changes to certain users' accounts with sms? For example, let us know when a new role is assigned.
>>>>>>>>>>>
>>>>>>>>>>> I will send the information to the users to be identified. How can I do that. With the role?
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>>
>>>>>>>>>>> 2017-02-28 17:08 GMT+03:00 Jason Everling <jeverling at bshp.edu>:
>>>>>>>>>>>> I have never used anything outside of what I posted, but in a standard notification you add the parts, you could try,
>>>>>>>>>>>>
>>>>>>>>>>>> + requestee?.getName()?.getOrig() which is the username and + midpoint.getPlaintextUserPassword(requestee) is the password of the account being changed.
>>>>>>>>>>>>
>>>>>>>>>>>> Within our notification I get the username and password with + encodedMessageText , it displays the below. Can you post what you get from the sms-notifications log
>>>>>>>>>>>>
>>>>>>>>>>>> 'Password for user tauser2 is: n3wPassw0rd'
>>>>>>>>>>>>
>>>>>>>>>>>> JASON
>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Feb 28, 2017 at 12:26 AM, mceylan <mrveceylan at gmail.com> wrote:
>>>>>>>>>>>>> Hi Gustav, I enter real information in the live system. I did not want to write Mail. Because, gateway real username and password.
>>>>>>>>>>>>>
>>>>>>>>>>>>> There is no problem sending SMS. The problem is to send the username and password of the user I created in sms and to inform when the account is changed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2017-02-28 7:58 GMT+02:00 Pálos Gustáv <gustav.palos at evolveum.com>:
>>>>>>>>>>>>>> Hi Merve,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> username and password are not variables, are you REAL username and REAL password, please replace it like this:
>>>>>>>>>>>>>> http:/my-gateway/api/v3/sendsms/plain?user=palos&password=abcd123X&sender=XX....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Gustav
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2017-02-28 6:49 GMT+01:00 mceylan <mrveceylan at gmail.com>:
>>>>>>>>>>>>>>> Hi Jason,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The message I wrote in EncodedMessageText comes up but the username and password do not come up. How can I send those variables in the script
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> <handler>
>>>>>>>>>>>>>>> <userPasswordNotifier>
>>>>>>>>>>>>>>> <recipientExpression>
>>>>>>>>>>>>>>> <script>
>>>>>>>>>>>>>>> <code>requestee.getTelephoneNumber()</code>
>>>>>>>>>>>>>>> </script>
>>>>>>>>>>>>>>> </recipientExpression>
>>>>>>>>>>>>>>> <transport>sms</transport>
>>>>>>>>>>>>>>> </userPasswordNotifier>
>>>>>>>>>>>>>>> </handler>
>>>>>>>>>>>>>>> <sms>
>>>>>>>>>>>>>>> <gateway>
>>>>>>>>>>>>>>> <url>
>>>>>>>>>>>>>>> <script>
>>>>>>>>>>>>>>> <code>"http:/my-gateway/api/v3/sendsms/plain?user=username&password=password&sender=XX" + "&GSM=" + to + "&text=" + "account"</code>
>>>>>>>>>>>>>>> </script>
>>>>>>>>>>>>>>> </url>
>>>>>>>>>>>>>>> </gateway>
>>>>>>>>>>>>>>> </sms>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> send to message "account"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2017-02-28 2:28 GMT+02:00 Jason Everling <jeverling at bshp.edu>:
>>>>>>>>>>>>>>>> If you are testing SMS then yes, use a test account with your phone number.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> JASON
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Feb 27, 2017 at 1:57 AM, mceylan <mrveceylan at gmail.com> wrote:
>>>>>>>>>>>>>>>>> thanks Jason, no problem. There will be another responsibility.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> For changes made to specific users' accounts, SMS will be provided to the user. Do I submit changes to my account? Can I also send a username and password?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2017-02-23 17:28 GMT+02:00 Jason Everling <jeverling at bshp.edu>:
>>>>>>>>>>>>>>>>>> Maybe try the below, your sms code has changed a few times between your messages, GSM= I am assuming is the phone number to send
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> <notificationConfiguration>
>>>>>>>>>>>>>>>>>> <handler>
>>>>>>>>>>>>>>>>>> <userPasswordNotifier>
>>>>>>>>>>>>>>>>>> <recipientExpression>
>>>>>>>>>>>>>>>>>> <script>
>>>>>>>>>>>>>>>>>> <code>
>>>>>>>>>>>>>>>>>> requestee.getTelephoneNumber()
>>>>>>>>>>>>>>>>>> </code>
>>>>>>>>>>>>>>>>>> </script>
>>>>>>>>>>>>>>>>>> </recipientExpression>
>>>>>>>>>>>>>>>>>> <transport>sms</transport>
>>>>>>>>>>>>>>>>>> </userPasswordNotifier>
>>>>>>>>>>>>>>>>>> </handler>
>>>>>>>>>>>>>>>>>> <sms>
>>>>>>>>>>>>>>>>>> <gateway>
>>>>>>>>>>>>>>>>>> <url>
>>>>>>>>>>>>>>>>>> <script>
>>>>>>>>>>>>>>>>>> <code>"http://my-gateway/api/v3/sendsms/plain?user=USERNAME&password=PASSWORD&SMSText=" + encodedMessageText + "&GSM=" + to</code>
>>>>>>>>>>>>>>>>>> </script>
>>>>>>>>>>>>>>>>>> </url>
>>>>>>>>>>>>>>>>>> </gateway>
>>>>>>>>>>>>>>>>>> </sms>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> JASON
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Thu, Feb 23, 2017 at 9:06 AM, Jason Everling <jeverling at bshp.edu> wrote:
>>>>>>>>>>>>>>>>>>> I don't see a part in your gateway code that contains the 'to' field , how does it know which phone to send the message to?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Some where in there you should have + to and also + encodedMessageText
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> The 'to' variable is what requestee.getTelephoneNumber() returns and encodedMessageText variable returns the message, password in the case of userPasswordNotifier, which mine sends by default,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> '================ Wed Feb 22 08:43:21 CST 2017 =======
>>>>>>>>>>>>>>>>>>> Message{to='[12107654321]', subject='User password notification', contentType='null', body='Password for user tauser2 is: s0m3passW0rd'}
>>>>>>>>>>>>>>>>>>> '
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Somewhere in this url you have to have the 'to' variable, don't know which gateway you are using so I cant tell you how it is used and where to insert it,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> "http://my-gateway/api/v3/sendsms/plain?user=USERNAME&password=PASSWORD&sender=SIFRE&SMSText=test123&" + "&text=" + "deneme"
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> midPoint mailing list
>>>>>>>>>>>>>>>>>> midPoint at lists.evolveum.com
>>>>>>>>>>>>>>>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Merve CEYLAN
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> midPoint mailing list
>>>>>>>>>>>>>>>>> midPoint at lists.evolveum.com
>>>>>>>>>>>>>>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> midPoint mailing list
>>>>>>>>>>>>>>>> midPoint at lists.evolveum.com
>>>>>>>>>>>>>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Merve CEYLAN
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> midPoint mailing list
>>>>>>>>>>>>>>> midPoint at lists.evolveum.com
>>>>>>>>>>>>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> s pozdravom
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Gustáv Pálos
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Gustáv Pálos
>>>>>>>>>>>>>> Identity Engineer
>>>>>>>>>>>>>> evolveum.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> midPoint mailing list
>>>>>>>>>>>>>> midPoint at lists.evolveum.com
>>>>>>>>>>>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Merve CEYLAN<
>>>>> ...
>>>>>
>>>>> [Message clipped]
>>>>> _______________________________________________
>>>>> midPoint mailing list
>>>>> midPoint at lists.evolveum.com
>>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> midPoint mailing list
>>>> midPoint at lists.evolveum.com
>>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>>
>>>
>>>
>>>
>>> --
>>> Merve CEYLAN
>>>
>>> _______________________________________________
>>> midPoint mailing list
>>> midPoint at lists.evolveum.com
>>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>>
>>
>>
>> _______________________________________________
>> midPoint mailing list
>> midPoint at lists.evolveum.com
>> http://lists.evolveum.com/mailman/listinfo/midpoint
>>
>
>
>
> --
> Merve CEYLAN
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20170311/f7355e5e/attachment.htm>
More information about the midPoint
mailing list