[midPoint] How to Communicate from midPoint to Remote Connector Server

[Pavol Mederly]

Hello,

one more thing (maybe not very probable, but possible) - are you using 
the correct version of the Connector Server? I.e. which version do you use?

Regards
Pavol
> Hi,
>
> let's start from the simplest things first:
>
> 1. is your TCP communication between connector server and connector 
> host? (port 8759)
> 2. are you using or not using SSL?
> 3. is the connector server still running even after you encounter this 
> failure?
> 4. can you check Connector Server logs? There should be something 
> regarding this failure.
>
> For me it looks like a communication problem.
>
> Regards,
> I.
>
> ------------------------------------------------------------------------
>
>     *From: *"Indresh Kumar Bajpai" <indresh.bajpai at ilantus.com>
>     *To: *midpoint at lists.evolveum.com
>     *Cc: *"Shelly Piplani" <shelly.piplani at ilantus.com>, "Sumit
>     Sharma" <sumit.sharma at ilantus.com>
>     *Sent: *Tuesday, October 7, 2014 8:25:21 AM
>     *Subject: *Re: [midPoint] How to Communicate from midPoint to
>     Remote Connector Server
>
>     Hi Team,
>
>
>     Can somebody assist on this.
>
>
>     Requirement is as below.
>
>
>     1) - I have configured and set up the SAP Connector in my local
>     machine, now i am trying to communicate from my local machine to
>     Demo Server (typically a Linux machine) through Remote Connector
>     Host,i have installed the Remote Connector Server in my Local
>     machine as well.
>
>
>     2)- while communicating from midpoint to  Connector Server, i am
>     passing the fallowing parameters in Connector Host -  Name, Host
>     Name, Port, Shared Secret.
>
>
>     while importing this connector host in mid point under
>     Resource tab  by clicking on Discovery i am getting the fallowing
>     error.
>
>
>
>     [pastedImage.png]
>
>
>     ------------------------------------------------------------------------
>
>     can some body suggest that what exact parameters should i need to
>     pass while configuring Connector host in midpoint for SAP
>     Connector, so that i can communicate with demo server through
>     remote Connector host.
>
>     Thanks and Regards
>     Indresh ..
>
>
>
>     *From:* midPoint <midpoint-bounces at lists.evolveum.com> on behalf
>     of Pavol Mederly <mederly at evolveum.com>
>     *Sent:* 06 October 2014 20:54
>     *To:* midpoint at lists.evolveum.com
>     *Subject:* Re: [midPoint] How To Communicate From Mid point to
>     Remote Connector Server
>     Hello Indresh!
>
>     Please see
>     https://wiki.evolveum.com/display/midPoint/Active+Directory+HOWTO
>     for an inspiration.
>
>     If you would go through that manual, and if you get stuck at some
>     point, just let us know and we'll try to help you.
>
>     Regards,
>     Pavol
>
>
>         Hi Team,
>
>
>         Can somebody assist me on How to connect from mid point to
>         Remote Connector Server.
>
>
>         I have installed Connector Server in my local machine and
>         trying to connect to midpoint.
>
>
>         Thanks and Regards
>
>         Indresh Kumar
>
>
>         This message contains information that may be privileged or
>         confidential and is the property of ILANTUS Technologies. It
>         is intended only for the person to whom it is addressed. If
>         you are not the intended recipient, you are not authorized to
>         read, print, retain, copy, disseminate, distribute, or use
>         this message or any part thereof. If you receive this message
>         in error, please notify the sender immediately and delete all
>         copies of this message.
>
>
>         _______________________________________________
>         midPoint mailing list
>         midPoint at lists.evolveum.com
>         http://lists.evolveum.com/mailman/listinfo/midpoint
>
>
>     This message contains information that may be privileged or
>     confidential and is the property of ILANTUS Technologies. It is
>     intended only for the person to whom it is addressed. If you are
>     not the intended recipient, you are not authorized to read, print,
>     retain, copy, disseminate, distribute, or use this message or any
>     part thereof. If you receive this message in error, please notify
>     the sender immediately and delete all copies of this message.
>     This message contains information that may be privileged or
>     confidential and is the property of ILANTUS Technologies. It is
>     intended only for the person to whom it is addressed. If you are
>     not the intended recipient, you are not authorized to read, print,
>     retain, copy, disseminate, distribute, or use this message or any
>     part thereof. If you receive this message in error, please notify
>     the sender immediately and delete all copies of this message.
>     _______________________________________________
>     midPoint mailing list
>     midPoint at lists.evolveum.com
>     http://lists.evolveum.com/mailman/listinfo/midpoint
>
>
>
>
> -- 
>   Ing. Ivan Noris
>   Senior Identity Management Engineer
>   evolveum.com
>   ___________________________________________
>            "Idem per idem - semper idem Vix."
>
>
> _______________________________________________
> midPoint mailing list
> midPoint at lists.evolveum.com
> http://lists.evolveum.com/mailman/listinfo/midpoint

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20141007/79573f07/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 26003 bytes
Desc: not available
URL: <https://lists.evolveum.com/pipermail/midpoint/attachments/20141007/79573f07/attachment.png>